Authorised Indian Partner of RekaSold and serviced by Mahisa, MumbaiPrices valid till 31 Dec 2026
hotglueguns.inby MahisaAuthorised Indian Partner

Hot melt glue gun for cartons and cardboard boxes.

For cartons and boxes, we'd usually start with a mechanical MS 80 or MS 200 for short runs, samples and rework, and an air-driven TR 50.5 or TR 55.2 LCD for a full shift. Fit the 18 mm slot nozzle to close boxes with a wide, flat band. We supply the adhesive with the gun.

It depends on

  • how many boxes, and how fast
  • closing flaps, sealing a seam or covering a pallet layer
  • plain, coated or printed board
  • where the boxes go: cold rooms, hot transport, stacked weight
  • compressed air at the workstation
  • the adhesive

Which gun?

Your situation Where we’d start
Now and then, samples, rework MS 80 or the MS 200 family
A full shift TR 50.5
Long runs where refilling slows you TR 55.2 LCD, 330 ml
Large areas, or securing cartons on a pallet TR 60 LCD spray

Which nozzle?

  • 18 mm slot #3716: made for closing boxes.
  • 10 mm slot #2741: an alternative to glue dots.
  • Standard round nozzle: a bead.
  • Multi-hole nozzles: several lines at once. See the nozzle finder.
A carton with its inner flaps folded in and a flat band of glue on each inner flap
Closing a box: the 18 mm slot nozzle #3716 lays a flat band on the inner flaps, where the outer flaps land.

Already run an automatic gluing line?

A hand gun covers what the line should not: small batches, hand samples, trying a new adhesive, and reworking rejects.

Securing cartons on a pallet

The TR 60 LCD sprays a wide area: it covers the top of a Euro pallet, 120 × 80 cm.

A pallet with fine threads of glue sprayed over its top
Fine threads over the pallet top from the TR 60 LCD, before the cartons go on.

An example setup

Take a job like sweets in cellophane bags glued onto cardboard hangers, with a food-approved adhesive that has to survive hot and cold transport and hang on a shelf. The setup: a TR 55.2 LCD on the bench mount with a footswitch and a 3-hole nozzle, both hands free. Three lines side by side give a bigger bond area without a thick bead.

A cardboard hanger card with three parallel lines of glue, and a bag of sweets that is pressed onto them
Three lines side by side from a 3-hole nozzle; the bag is pressed onto them.

Questions.

Can a hot glue gun close carton boxes?

Yes. The 18 mm slot nozzle lays a flat band that closes flaps.

Which hot melt is best for cardboard?

It depends on the board, its coating and where the boxes go. Tell us and we recommend one.

Do I need compressed air?

Not for the MS guns. The TR guns need 2 to 6 bar.

Tell us your job.

Tell us what you are bonding and how many a day. We will suggest the gun, nozzle and glue, with prices.

+91 98198 09954 · call or WhatsApp · Mon–Sat 9:00–17:30

About: Cartons and boxes

How should we reply?

We email you a confirmation with your reference number. Prefer WhatsApp? Chat with us, or write to sales@mahisa.com. How we use your details.