Hot melt glue gun for fabric, textiles and nonwovens.
For fabric and nonwovens, a wide slot nozzle lays a flat band instead of a bead. The 45 mm slot nozzle suits hot melts for hygiene and insulation products, and replaces costly double-sided tape, for permanent or removable bonds. It fits the MS 200 family.
It depends on
- a permanent or removable bond
- how wide the band must be
- how long you need to position the part (slot nozzles suit glues with long open times)
- run length
- the adhesive
Where we’d start
- A flat band: the MS 200 family with the 18 mm or 45 mm slot nozzle, or an air gun with the 18 mm slot nozzle.
- Laminating or large areas: spray, with the TR 60 LCD or TR 80 LCD.
- Dots: the 10 mm slot or a round nozzle.
Replacing double-sided tape
The 45 mm slot nozzle #10150 replaces costly double-sided tape, for permanent or removable bonds.
Nozzles
These suit glues with long open times, such as pressure-sensitive hot melt. For upholstery, see foam and upholstery.
Questions.
Can you use a hot glue gun on fabric?
Yes. A wide slot nozzle lays a flat band that suits fabric better than a round bead. Tell us the fabric and we recommend the adhesive.
Can hot melt replace double-sided tape?
Yes. The 45 mm slot nozzle lays a band that replaces costly double-sided tape, for permanent or removable bonds.
Tell us your job.
Tell us what you are bonding and how many a day. We will suggest the gun, nozzle and glue, with prices.
+91 98198 09954 · call or WhatsApp · Mon–Sat 9:00–17:30